Owner self-reported — never independently field-inspected
Location confidence
No coordinate anomaly detected
Terrain cross-check (USGS 3DEP)
FAA 624 ft MSL · USGS ground 626 ft · Δ -2 ft
Structure cross-check (Overture / OSM)
Rooftop pad — the coordinate falls on a building footprint
Building height ≈ 25 ft — measured independently of the FAA record
Cross-source consensus
⚠ Sources conflict — pad is on a building, but FAA elevation reads ground level
Stale-low FAA elevation (the 6FD8 class) — never updated for the rooftop pad. Treat the recorded elevation as unreliable.
Cross-checked against independent public data — USGS 3DEP terrain, Overture/OSM building footprints, the federal hospital registry, and measured dimensions. The State of the U.S. Heliport Record →
The recorded pad is 60 ft short of the 100 ft footprint an eVTOL would need — shown to scale.
recorded pad eVTOL FATO
Recorded pad (limiting side)
40 ft
eVTOL FATO required
100 ft
FAA EB-105 vertiport pattern — 2× a ~50 ft eVTOL controlling dimension, plus a 125 ft safety-area side.
Load-bearing FATO
100 × 100 ft must be structural
No heliport precedent — typically the binding gate for rooftop and hospital pads.
Obstruction clearance
High obstacle within 0.5 nm — conflicts with the expanded footprint and 8:1 approach
Measured against FAA pad geometry and federal FATO sizing (EB-105). A dimensional pre-screen — site-level validation required, and independent of the underwriting risk score.
NFPA 418 adoption status not yet assessed for this jurisdiction.
FAA facility data
FAA LID
2IL5
AIX ID
aix:hp:06N81AJP
Lat / Lng
42.02429, -87.78119
Elevation
624 ft MSL
Pad dimensions
40 × 40 ft
Surface type
WOOD
Activation date
2021/12
FAA OEAAA airspace determinations1
Airspace clearance
On file as archived / procedural records — no standing clearance to track.
Filing activity
Most recent determination 2021-01-28
NRAARCH-DeterminedASN 2021-AGL-1063-NRA2021-06-16
Heliport · 45 ft AGL — LAP ASN # 2021-CSA-21-LAP\r\nEstablish New Heliport\r\nDesign Aircraft R-44 -- RD 33'\r\nProponent requests ingress/egress to be 360° CW 180°
Blueprint
The record vs. what we measured
69/100
DATA INTEGRITY
Surface elevation
The FAA record places this pad at 624 ft. USGS terrain plus the building put the actual rooftop at 651 ft — a +27 ft difference the federal record doesn’t carry.
eVTOL footprint
The 40 ft pad is 60 ft short of the 100 ft an eVTOL FATO requires (measured).
SIGNALFEDERAL RECORDMEASURED
Surface elevation624 ft651 ft · USGS+structure
Structurenot on recordRooftop pad
Pad dimensions40 ft side (filed)40 ft side · measured
Coordinate integrityas filedterrain cross-checked
Independent inspectionowner self-reportednone on record
✓Federal record
→
✓Cross-checkedUSGS · Overture · dimensions
→
3Physically verifiedGround Truth capture
Obstructions, exact FATO geometry, surface condition, and downwash exposure require a physical Ground Truth capture — not shown above as measured. A field verification completes the record and writes the measured truth to this facility’s authority.
This page is the public data-integrity record. The full RiskIndex assessment — Q1–Q5 compliance, dimensional / FATO analysis, an underwriting-grade risk score, peer benchmark, and a sealed Site Intelligence Report — is available on request.
CROWN POINT CORPORATION, MORTON GROVE, IL (FAA 2IL5). AirIndex facility record aix:hp:06N81AJP. Verifiable at https://www.airindex.io/verify/aix:hp:06N81AJP.