AirIndex Research · FAA LID 86KY

WINDYS CENTRAL

BELLEVUE, KY — Cincinnati metro. Operational · Private use.

OperationalPrivate usePrivate
← All Cincinnati heliports

Watch this facility

Get an email when the record for Windys Central changes: its FAA registration, pad data, nearby FAA airspace determinations, or AirIndex findings. A weekly digest arrives only when something changed.

Already a reader? Sign in to watch it
Loading satellite view…

Data integrity

53/100
Self-reportedData Integrity Index
Independent inspection
Owner self-reported — never independently field-inspected
Location confidence
⚠ Location-suspect — recorded coordinates may be mislocated
Terrain cross-check (USGS 3DEP)
FAA 588 ft MSL · USGS ground 504 ft · Δ 84 ft
Differential consistent with an elevated / rooftop pad
Cross-source consensus
Single independent source — no corroboration available

Cross-checked against independent public data — USGS 3DEP terrain, Overture/OSM building footprints, the federal hospital registry, and measured dimensions. The State of the U.S. Heliport Record →

eVTOL readiness

UNVERIFIEDConversion feasibility · four readings, one line each
Obstruction screen
No data
No FAA obstacle data on file for this state. Clearance unverified.
Geometry
Requires 85 feet of expansion
Recorded pad side 15 ft against a 100 ft eVTOL FATO.
Structural FATO
Unverified
The full 100 × 100 ft FATO must be load-bearing. The FAA does not record structural capacity, so no record can confirm it.
Overall
Unverified
No obstruction data on file. The dimensional gap applies; clearance is unverified.
100 ft · eVTOL FATO
The recorded pad is 85 ft short of the 100 ft footprint an eVTOL would need — shown to scale.
recorded pad eVTOL FATO
Recorded pad (limiting side)
15 ft
eVTOL FATO required
100 ft
FAA EB-105 vertiport pattern — 2× a ~50 ft eVTOL controlling dimension, plus a 125 ft safety-area side.
Load-bearing FATO
100 × 100 ft must be structural
No heliport precedent — typically the binding gate for rooftop and hospital pads.

Measured against FAA pad geometry and federal FATO sizing (EB-105). The obstruction screen is the only reading the engine verdict rests on; geometry and structural capacity are stated separately and never folded into it. A dimensional pre-screen — site-level validation required, and independent of the underwriting risk score.

FAA facility data

FAA LID
86KY
AIX ID
aix:hp:4G5FVG3G
Lat / Lng
39.10389, -84.48722
Elevation
588 ft MSL
Pad dimensions
15 × 15 ft
Surface type
MATS
Activation date
2021/08

FAA OEAAA airspace determinations1

Airspace clearance
On file as archived / procedural records — no standing clearance to track.
Filing activity
Most recent determination 2021-06-30
  • NRAARCH-DeterminedASN 2021-ASO-3668-NRA
    2021-08-10
    Form 7480 · 0 ft AGL — LAP ASN # 2021-ESA-109-LAP
Blueprint
The record vs. what we measured
53/100
DATA INTEGRITY
eVTOL footprint
FATO 100 ft reqHTLOF 15 ft

The 15 ft pad is 85 ft short of the 100 ft an eVTOL FATO requires (measured).

SIGNALFEDERAL RECORDMEASURED
Surface elevation588 ftnot cross-checked
Structurenot on recordnot cross-checked
Pad dimensions15 ft side (filed)15 ft side · measured
Coordinate integrityas filed⚠ location-suspect
Independent inspectionowner self-reportednone on record
✓Federal record
✓Cross-checkedUSGS · Overture · dimensions
3Physically verifiedGround Truth capture
Obstructions, exact FATO geometry, surface condition, and downwash exposure require a physical Ground Truth capture — not shown above as measured. A field verification completes the record and writes the measured truth to this facility’s authority.
Request Ground Truth verification

Full risk assessment

This page is the public data-integrity record. The full RiskIndex assessment — Q1–Q5 compliance, dimensional / FATO analysis, an underwriting-grade risk score, peer benchmark, and a sealed Site Intelligence Report — is available on request.

Request the full assessment

Building autonomous systems? See the machine-verified feed

Provenance FAA NASR 5010 · USGS 3DEP terrain · eVTOL screen conversion-feasibility-1.1 · AIX-ID aix:hp:4G5FVG3G · Methodology →
Cite this facility

WINDYS CENTRAL, BELLEVUE, KY (FAA 86KY). AirIndex facility record aix:hp:4G5FVG3G. Verifiable at https://www.airindex.io/verify/aix:hp:4G5FVG3G.

Verify this record →

AIX-IDs are free to cite and reference; the registry is the source of record. The verify link resolves this record against the audit chain.

← All Cincinnati heliports