Get an email when the record for East Tennessee Helicopters changes: its FAA registration, pad data, nearby FAA airspace determinations, or AirIndex findings. A weekly digest arrives only when something changed.
Owner self-reported — never independently field-inspected
Location confidence
⚠ Location-suspect — recorded coordinates may be mislocated
Terrain cross-check (USGS 3DEP)
FAA 2350 ft MSL · USGS ground 2289 ft · Δ 61 ft
Differential consistent with an elevated / rooftop pad
Structure cross-check (Overture / OSM)
Ground-level — no building footprint at the coordinate
Cross-source consensus
⚠ Sources conflict — FAA elevation sits above terrain, but no building is at the coordinate
Either a freestanding / tower pad or a mislocated coordinate — independent verification recommended.
Cross-checked against independent public data — USGS 3DEP terrain, Overture/OSM building footprints, the federal hospital registry, and measured dimensions. The State of the U.S. Heliport Record →
eVTOL readiness
CONDITIONALConversion feasibility · four readings, one line each
Obstruction screen
Clear
No obstructions within 0.5 nm on the FAA obstacle file.
Geometry
Requires 80 feet of expansion
Recorded pad side 20 ft against a 100 ft eVTOL FATO.
Structural FATO
Unverified
The full 100 × 100 ft FATO must be load-bearing. The FAA does not record structural capacity, so no record can confirm it.
Overall
Conditional
Obstruction screen passed. Geometry and structural capacity remain open. Site validation required.
The recorded pad is 80 ft short of the 100 ft footprint an eVTOL would need — shown to scale.
recorded pad eVTOL FATO
Recorded pad (limiting side)
20 ft
eVTOL FATO required
100 ft
FAA EB-105 vertiport pattern — 2× a ~50 ft eVTOL controlling dimension, plus a 125 ft safety-area side.
Load-bearing FATO
100 × 100 ft must be structural
No heliport precedent — typically the binding gate for rooftop and hospital pads.
Measured against FAA pad geometry and federal FATO sizing (EB-105). The obstruction screen is the only reading the engine verdict rests on; geometry and structural capacity are stated separately and never folded into it. A dimensional pre-screen — site-level validation required, and independent of the underwriting risk score.
NFPA 418 adoption status not yet assessed for this jurisdiction.
FAA facility data
FAA LID
9TN3
AIX ID
aix:hp:KEZCCGFF
Lat / Lng
36.41937, -81.94520
Elevation
2350 ft MSL
Pad dimensions
20 × 20 ft
Surface type
CONC
Activation date
2012/01
Last owner update
2020/04/29
FAA OEAAA airspace determinations1
Airspace clearance
On file as archived / procedural records — no standing clearance to track.
Filing activity
Most recent determination 2010-06-23
NRAARCH-DeterminedASN 2010-ASO-900-NRA2010-10-14
Heliport · 0 ft AGL — Existing private use heliport. The circle search shows 0 landing ares located w/i 5 nautical miles. Paper work is attached.
Blueprint
The record vs. what we measured
60/100
DATA INTEGRITY
eVTOL footprint
The 20 ft pad is 80 ft short of the 100 ft an eVTOL FATO requires (measured).
SIGNALFEDERAL RECORDMEASURED
Surface elevation2350 ftnot cross-checked
Structurenot on recordGround-level
Pad dimensions20 ft side (filed)20 ft side · measured
Coordinate integrityas filed⚠ location-suspect
Independent inspectionowner self-reportednone on record
✓Federal record
→
✓Cross-checkedUSGS · Overture · dimensions
→
3Physically verifiedGround Truth capture
Obstructions, exact FATO geometry, surface condition, and downwash exposure require a physical Ground Truth capture — not shown above as measured. A field verification completes the record and writes the measured truth to this facility’s authority.
This page is the public data-integrity record. The full RiskIndex assessment — Q1–Q5 compliance, dimensional / FATO analysis, an underwriting-grade risk score, peer benchmark, and a sealed Site Intelligence Report — is available on request.
EAST TENNESSEE HELICOPTERS, MOUNTAIN CITY, TN (FAA 9TN3). AirIndex facility record aix:hp:KEZCCGFF. Verifiable at https://www.airindex.io/verify/aix:hp:KEZCCGFF.