AirIndex Research · FAA LID AZ20

WESTCOR HOME OFFICE

PHOENIX, AZ — Phoenix metro. Operational · Private use.

OperationalPrivate usePrivate
← All Phoenix heliports

Watch this facility

Get an email when the record for Westcor Home Office changes: its FAA registration, pad data, nearby FAA airspace determinations, or AirIndex findings. A weekly digest arrives only when something changed.

Already a reader? Sign in to watch it
Loading satellite view…

For hospital and EMS teams

No hospital is linked to this landing site in our records. If it serves a hospital, tell us.
Is the FAA record right?
FAA status: Open. Last FAA inspection: none on record (common for private-use pads, which the FAA does not routinely inspect). Last update from the owner: 2025/05/06. Our check of the record: Corroborated (details below).
What has the FAA said about its airspace?
No FAA airspace determination is linked to this site in the records we hold.
What is being built nearby?
No FAA obstruction filings (cranes, buildings, towers) within 1 nm in the last 12 months.
Where else can aircraft land nearby?
Nearest airport weather station
SDL
Keeping the FAA record right
  1. See your official record in the FAA's Airport Data and Information Portal (ADIP).
  2. To correct it, the facility manager signs in to ADIP and uses Airport Master Record, Update Facility Data (Airport/Heliport). The paper private-use form 5010-2 was retired in July 2024.
  3. Building, changing, reopening or closing a landing site needs notice to the FAA on Form 7480-1 (14 CFR Part 157).

AirIndex compiles public FAA, federal and hospital records and checks them against each other. It is not a source for navigation or flight planning; use official FAA sources and your operator's procedures. See something wrong? Report a correction (how corrections work).

Data integrity

79/100
CorroboratedData Integrity Index
Independent inspection
Owner self-reported — never independently field-inspected
Location confidence
No coordinate anomaly detected
Terrain cross-check (USGS 3DEP)
FAA 1370 ft MSL · USGS ground 1370 ft · Δ 0 ft
Structure cross-check (Overture / OSM)
Ground-level — no building footprint at the coordinate
Cross-source consensus
Corroborated — terrain and structure agree (2/2 sources)

Cross-checked against independent public data — USGS 3DEP terrain, Overture/OSM building footprints, the federal hospital registry, and measured dimensions. The State of the U.S. Heliport Record →

eVTOL readiness

CONDITIONALConversion feasibility · four readings, one line each
Obstruction screen
Clear
No obstructions within 0.5 nm on the FAA obstacle file.
Geometry
Meets the FATO footprint
Recorded pad side 300 ft against a 100 ft eVTOL FATO.
Structural FATO
Unverified
The full 100 × 100 ft FATO must be load-bearing. The FAA does not record structural capacity, so no record can confirm it.
Overall
Conditional
Obstruction screen passed. Geometry and structural capacity remain open. Site validation required.
100 ft · eVTOL FATO300 ft
This pad already covers the eVTOL landing footprint as it stands.
recorded pad eVTOL FATO
Recorded pad (limiting side)
300 ft
eVTOL FATO required
100 ft
FAA EB-105 vertiport pattern — 2× a ~50 ft eVTOL controlling dimension, plus a 125 ft safety-area side.
Load-bearing FATO
100 × 100 ft must be structural
No heliport precedent — typically the binding gate for rooftop and hospital pads.

Measured against FAA pad geometry and federal FATO sizing (EB-105). The obstruction screen is the only reading the engine verdict rests on; geometry and structural capacity are stated separately and never folded into it. A dimensional pre-screen — site-level validation required, and independent of the underwriting risk score.

FAA compliance

Q1 · FAA registrationPASS
Active FAA NASR 5010 record.
Q2 · Airspace determinationUNKNOWN
FAA OE/AAA airspace determination data integration pending.
Q3 · State enforcementMODERATE
State has partial enforcement framework.
Q4 · NFPA 418PARTIAL
IBC references NFPA 418 for rooftop facilities. Standalone fire code reference not confirmed.

FAA facility data

FAA LID
AZ20
AIX ID
aix:hp:AYGZE62Q
Lat / Lng
33.59319, -111.97898
Elevation
1370 ft MSL
Pad dimensions
300 × 300 ft
Surface type
TURF
Activation date
1980/04
Last owner update
2025/05/06

FAA OEAAA airspace determinations0

No FAA OEAAA determinations linked to this facility.
Blueprint
The record vs. what we measured
79/100
DATA INTEGRITY
eVTOL footprint
FATO 100 ft reqHTLOF 300 ft

Footprint assessment available.

SIGNALFEDERAL RECORDMEASURED
Surface elevation1370 ftnot cross-checked
Structurenot on recordGround-level
Pad dimensions300 ft side (filed)300 ft side · measured
Coordinate integrityas filedterrain cross-checked
Independent inspectionowner self-reportednone on record
✓Federal record
✓Cross-checkedUSGS · Overture · dimensions
3Physically verifiedGround Truth capture
Obstructions, exact FATO geometry, surface condition, and downwash exposure require a physical Ground Truth capture — not shown above as measured. A field verification completes the record and writes the measured truth to this facility’s authority.
Request Ground Truth verification

Full risk assessment

This page is the public data-integrity record. The full RiskIndex assessment — Q1–Q5 compliance, dimensional / FATO analysis, an underwriting-grade risk score, peer benchmark, and a sealed Site Intelligence Report — is available on request.

Request the full assessment

Building autonomous systems? See the machine-verified feed

Provenance FAA NASR 5010 · pad dims APT cycle 2026/03/19 · USGS 3DEP terrain · Overture structure · eVTOL screen conversion-feasibility-1.1 · AIX-ID aix:hp:AYGZE62Q · Methodology →
Cite this facility

WESTCOR HOME OFFICE, PHOENIX, AZ (FAA AZ20). AirIndex facility record aix:hp:AYGZE62Q. Verifiable at https://www.airindex.io/verify/aix:hp:AYGZE62Q.

Verify this record →

AIX-IDs are free to cite and reference; the registry is the source of record. The verify link resolves this record against the audit chain.

← All Phoenix heliports