Get an email when the record for St Lukes Monroe changes: its FAA registration, pad data, nearby FAA airspace determinations, or AirIndex findings. A weekly digest arrives only when something changed.
Owner self-reported — never independently field-inspected
Location confidence
No coordinate anomaly detected
Terrain cross-check (USGS 3DEP)
FAA 699 ft MSL · USGS ground 705 ft · Δ -6 ft
Structure cross-check (Overture / OSM)
Ground-level — no building footprint at the coordinate
Cross-source consensus
Corroborated — terrain and structure agree (2/2 sources)
Cross-checked against independent public data — USGS 3DEP terrain, Overture/OSM building footprints, the federal hospital registry, and measured dimensions. The State of the U.S. Heliport Record →
eVTOL readiness
UNVERIFIEDConversion feasibility · four readings, one line each
Obstruction screen
No data
No FAA obstacle data on file for this state. Clearance unverified.
Geometry
Requires 45 feet of expansion
Recorded pad side 55 ft against a 100 ft eVTOL FATO.
Structural FATO
Unverified
The full 100 × 100 ft FATO must be load-bearing. The FAA does not record structural capacity, so no record can confirm it.
Overall
Unverified
No obstruction data on file. The dimensional gap applies; clearance is unverified.
The recorded pad is 45 ft short of the 100 ft footprint an eVTOL would need — shown to scale.
recorded pad eVTOL FATO
Recorded pad (limiting side)
55 ft
eVTOL FATO required
100 ft
FAA EB-105 vertiport pattern — 2× a ~50 ft eVTOL controlling dimension, plus a 125 ft safety-area side.
Load-bearing FATO
100 × 100 ft must be structural
No heliport precedent — typically the binding gate for rooftop and hospital pads.
Measured against FAA pad geometry and federal FATO sizing (EB-105). The obstruction screen is the only reading the engine verdict rests on; geometry and structural capacity are stated separately and never folded into it. A dimensional pre-screen — site-level validation required, and independent of the underwriting risk score.
NFPA 418 adoption status not yet assessed for this jurisdiction.
FAA facility data
FAA LID
PA13
AIX ID
aix:hp:GPZPTFZS
Lat / Lng
40.99834, -75.26184
Elevation
699 ft MSL
Pad dimensions
55 × 55 ft
Surface type
CONC
Activation date
2020/03
Last owner update
2022/12/01
FAA OEAAA airspace determinations2
Airspace clearance
On file as archived / procedural records — no standing clearance to track.
Filing activity
Most recent determination 2020-02-20
NRAARCH-DeterminedASN 2020-AEA-358-NRA2020-02-20
Heliport · 0 ft AGL — LAP ASN # 2020-ESA-37-LAP. This LAP was created in order to be able to generate a new NRA Case/Site ID with an associated new TEMP ID 8202 that once constructed can be Submitted to NFDC. The NRA case will actually not be studied since the original case 2016-AEA-1532-NRA was studied resulting in a favorable Determination. Once the new Temp ID (8202) is submitted then the original TempID 6020 can be deleted.
NRAARCH-DeterminedASN 2016-AEA-1532-NRA2016-10-06
Heliport · 0 ft AGL — Establish New Heliport.
Blueprint
The record vs. what we measured
67/100
DATA INTEGRITY
eVTOL footprint
The 55 ft pad is 45 ft short of the 100 ft an eVTOL FATO requires (measured).
SIGNALFEDERAL RECORDMEASURED
Surface elevation699 ftnot cross-checked
Structurenot on recordGround-level
Pad dimensions55 ft side (filed)55 ft side · measured
Coordinate integrityas filedterrain cross-checked
Independent inspectionowner self-reportednone on record
✓Federal record
→
✓Cross-checkedUSGS · Overture · dimensions
→
3Physically verifiedGround Truth capture
Obstructions, exact FATO geometry, surface condition, and downwash exposure require a physical Ground Truth capture — not shown above as measured. A field verification completes the record and writes the measured truth to this facility’s authority.
This page is the public data-integrity record. The full RiskIndex assessment — Q1–Q5 compliance, dimensional / FATO analysis, an underwriting-grade risk score, peer benchmark, and a sealed Site Intelligence Report — is available on request.