AirIndex Research · FAA LID UT45

STATE CAPITOL HELICOPTER LANDING SITE

SALT LAKE CITY, UT — Salt Lake City metro. Operational · Private use.

OperationalPrivate usePublic
← All Salt Lake City heliports
Loading satellite view…

Data integrity

72/100
CorroboratedData Integrity Index
Independent inspection
Owner self-reported — never independently field-inspected
Location confidence
⚠ Location-suspect — recorded coordinates may be mislocated
Terrain cross-check (USGS 3DEP)
FAA 4350 ft MSL · USGS ground 4529 ft · Δ -178 ft
Structure cross-check (Overture / OSM)
Ground-level — no building footprint at the coordinate
Cross-source consensus
Single independent source — no corroboration available

Cross-checked against independent public data — USGS 3DEP terrain, Overture/OSM building footprints, the federal hospital registry, and measured dimensions. The State of the U.S. Heliport Record →

eVTOL readiness

InfeasibleConversion feasibility · obstruction screen
100 ft · eVTOL FATO100 ft
This pad already covers the eVTOL landing footprint as it stands.
recorded pad eVTOL FATO
Recorded pad (limiting side)
100 ft
eVTOL FATO required
100 ft
FAA EB-105 vertiport pattern — 2× a ~50 ft eVTOL controlling dimension, plus a 125 ft safety-area side.
Load-bearing FATO
100 × 100 ft must be structural
No heliport precedent — typically the binding gate for rooftop and hospital pads.
Obstruction clearance
High obstacle within 0.5 nm — conflicts with the expanded footprint and 8:1 approach

Measured against FAA pad geometry and federal FATO sizing (EB-105). A dimensional pre-screen — site-level validation required, and independent of the underwriting risk score.

FAA compliance

Q1 · FAA registrationPASS
Active FAA NASR 5010 record.
Q2 · Airspace determinationUNKNOWN
FAA OE/AAA airspace determination data integration pending.
Q3 · State enforcementUNKNOWN
State enforcement posture not yet assessed.
Q4 · NFPA 418UNKNOWN
NFPA 418 adoption status not yet assessed for this jurisdiction.

FAA facility data

FAA LID
UT45
AIX ID
aix:hp:GVDGG7CK
Lat / Lng
40.77688, -111.88692
Elevation
4350 ft MSL
Pad dimensions
100 × 100 ft
Surface type
TURF
Surface condition
FAIR
Activation date
1982/02
Last owner update
2020/07/27

FAA OEAAA airspace determinations0

No FAA OEAAA determinations linked to this facility.
Blueprint
The record vs. what we measured
72/100
DATA INTEGRITY
eVTOL footprint
FATO 100 ft reqHTLOF 100 ft

Footprint assessment available.

SIGNALFEDERAL RECORDMEASURED
Surface elevation4350 ftnot cross-checked
Structurenot on recordGround-level
Pad dimensions100 ft side (filed)100 ft side · measured
Coordinate integrityas filed⚠ location-suspect
Independent inspectionowner self-reportednone on record
Federal record
Cross-checkedUSGS · Overture · dimensions
3Physically verifiedGround Truth capture
Obstructions, exact FATO geometry, surface condition, and downwash exposure require a physical Ground Truth capture — not shown above as measured. A field verification completes the record and writes the measured truth to this facility’s authority.
Request Ground Truth verification

Full risk assessment

This page is the public data-integrity record. The full RiskIndex assessment — Q1–Q5 compliance, dimensional / FATO analysis, an underwriting-grade risk score, peer benchmark, and a sealed Site Intelligence Report — is available on request.

Request the full assessment

Building autonomous systems? See the machine-verified feed

Provenance FAA NASR 5010 · pad dims APT cycle 2026/03/19 · USGS 3DEP terrain · Overture structure · eVTOL screen conversion-feasibility-1.1 · AIX-ID aix:hp:GVDGG7CK · Methodology →
Cite this facility

STATE CAPITOL HELICOPTER LANDING SITE, SALT LAKE CITY, UT (FAA UT45). AirIndex facility record aix:hp:GVDGG7CK. Verifiable at https://www.airindex.io/verify/aix:hp:GVDGG7CK.

Verify this record →

AIX-IDs are free to cite and reference; the registry is the source of record. The verify link resolves this record against the audit chain.

← All Salt Lake City heliports